CA175 emboss stripe wood grain mural decal wallpaper film refurbishment contact paper

Wrapping furniture with fine texture woodgrain decorative vinyl is a fantastic way to breathe new life into old or outdated pieces.

1. Clean the surface of the furniture thoroughly with soap and water, or a cleaning agent that does not leave behind any residue.

2. Measure the dimensions of the furniture piece you want to cover and cut the self-adhesive film accordingly, leaving an extra inch on each side.

3. Peel off a small portion of the backing paper from one corner of the film, being careful not to touch the adhesive part with your fingers.

4. Align the exposed corner of the film with the corresponding corner of the furniture piece and gently press it into place.

5. Slowly peel away the backing paper while pressing down on the film with a squeegee or flat edge tool to avoid air bubbles or wrinkles.

6. Continue to apply the film in sections, smoothing out any wrinkles or air pockets as you go.

7. Trim off any excess film using a utility knife or sharp scissors.

8. Once all the film is applied, use a squeegee or flat edge tool again to firmly press down on the entire surface to ensure good adhesion.

9. Allow the film to set for at least 24 hours before using the furniture.

10. Enjoy your newly transformed furniture piece with a beautiful woodgrain finish!